Remote control duplicator 433 MHz – 4-channel universal remote control with keychain

FEATURES:

Are you always afraid of losing your remote key and paying high costs to replace it?

The remote duplicator provides you with the simplest and most cost-effective solution for duplicating wireless remotes, garage door openers, and much more – compatible with many fixed-code remotes at 433 MHz!

Advantages

• With this device, you can transmit signals and duplicate your existing remotes so you always have a backup in case you lose the original.

• The duplicator can clone up to 4 remote buttons from the same or different remotes, allowing you to carry four different remotes in one! Each corresponding letter (A, B, C & D) can open a different remote key.

• You can open your garage door and unlock your car using one remote, instead of carrying two keys.

• Radio transmission at 433 MHz, easy to use.

• You can copy compatible wireless remotes, and each password is stored separately.

Usage (VERY EASY!)

• Clear Code: Press and hold two buttons at the same time with two fingers (e.g., A & B or B & C, etc.); The LED will blink rapidly 3 times in about 2 seconds; Release one of the fingers (the other finger should hold one of the buttons) and then use the loose finger to click the loose button quickly three times until the LED light blinks; Then release both buttons. Then press any button on the remote.

• If the LED light goes out, it means that the code has been successfully cleared (all four buttons are empty); If the light still stays on after pressing a button on the remote, it indicates that the original code was not successfully cleared. You need to repeat the process, and only a successful erase operation can be successful. You can repeat the code deletion and copying.

• Copy: Hold the original remote in the left hand and our remote duplicator in the right hand, and bring both remotes as close together as possible; Press the first buttons of both remotes at the same time; The LED light will blink rapidly 2 times in about 2 seconds; After one second, the control light continues to blink, release your fingers; and then press the button on the second remote, after successful pairing the light stays on, indicating that the button code from the original remote was copied to the other remote; This process can be repeated for the second key, third key, etc... When the copy is successful, the remote works just like the original remote.

• Restore: If you accidentally delete the copied remote code, you can simultaneously press the copy buttons of the bottom two keys, then the LED lights will blink quickly, release and press any button. If the light stays constant, it means that the remote code has been restored. Make sure to delete the existing code from the remote before using our copier.

What to do if some keys work and others do not? Use the delete and restore procedure as described below:

• Start by deleting the code.

• After deleting, again copy the non-successful key without copying the other buttons; then delete the code again.

• Restore the code; This way the original keys that were not successfully copied will be replaced with new codes while the successful copies remain. Repeat this process until all keys have been successfully copied.

Get the remote duplicator now while supplies last

The package includes the 433 MHz remote duplicator.

SPECIFICATIONS:

• Type: Universal remote control 433 MHz

• Color: Black, Red, Blue, White, Gray

• Material: Plastic

• Weight: 0.1kg

PACKAGE:

• 1 / 3 / 5 x remote duplicator – depending on the selected quantity

NOTE:

• Please allow slight deviations due to manual measurements.

• The actual color of the item may differ slightly from the color displayed on the screen due to different display and lighting effects.